Harbor Freight Tools Electric Hammer 68147 - Manual (Page 8)

Page 8 For technical questions, please call 1‑800‑444‑3353. SKU 68147
SPECIFICATIONS
Electrical
Input
120 V~ / 60 Hz / 15 A
Blows Per
Minute
950 BPM
Chisel 1 Bull Point (included)
Weight 71 lb.
Other
Accessories
1 Oil Bottle
1 Carbon Brush Set
1 Flat Chisel
4 Hex Keys (5mm, 6mm, 8mm, 12mm)
1 Oil Tank Wrench
E252823
UNPACKING
When unpacking, make sure the item
is intact and undamaged. If any parts are
missing or broken, please call Harbor Freight
Tools at 1-800-444-3353 as soon as possible.
INSTRUCTIONS FOR
PUTTING INTO USE
Read the ENTIRE IMPORTANT
SAFETY INFORMATION
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
Note: For additional information regarding
the parts listed in the following pages,
refer to the Assembly Diagram
near the end of this manual.
Functions
Use Figure 1 below as reference
during Tool Setup and Operation.
Side Handle
(31A)
Fan Cover (10)
Housing (1)
Aluminum
Casing (60)
Front
Cover (75)
Lock
Lever (74)
Main Handle
(86)
Switch Lock
Pin (84)
Figure 1
Switch Trigger
(82)