Hitachi VT-UX615A - Manual (Page 59)

INSTANT RECORDING TIMER
59
INSTANT RECORDING TIMER
Using the Instant Recording Timer (IRT)
The Instant Recording Timer (REC/IRT button on the VCR) will let you make a simplified timer
recording without having to use the programming timer. In order to set the IRT properly the
clock must be set before starting.
1 Follow the steps 1 through 5 on "Basic recording steps" on pages 37 and 38.
2 Press the REC/IRT button twice to indicate the recording time on the display.
• You may increase the recording time by 30 minutes each time you press the REC/IRT button.
• While you are recording, the remaining recording time is shown on the VCR display.
• At the end of your recording, the display will read "0:00", recording will stop automatically,
and the VCR will turn itself off.
To stop recording while in the IRT mode: