Hitachi VT-UX615A - Manual (Page 50)

VIEWING THE ON-SCREEN DISPLAY
50
VIEWING THE ON-SCREEN DISPLAY
Switching between the clock, time counter and time of remaining tape
Press DISPLAY while the on-screen display is displayed. The on-screen display switches in
the order below together with the VCR's display.
Click to see on-screen and VCR displays
Press the DISPLAY button to see the clock.
Press the DISPLAY button a second time to see just the time counter.
Notes:
• The linear time counter operates only if there is something recorded on the tape.
• The counter changes to 0:00:00 when the tape is ejected.
Press the DISPLAY button a third time to see the tape remaining time.
Note: Immediately after the tape is inserted, "-:--" will appear.
2 minutes after playback or recording is started, the tape remaining time is displayed.
Press the CLEAR button repeatedly to switch the type of the tape used. The correct remaining
time will appear.
AUTO: T-120 or shorter tape
T-160: T-140 or T-160 tape
T-180: T-180 tape
T-210: T-210 tape
Notes:
• The tape remaining time is not displayed correctly for a tape without any recordings or tapes
other than T-30/60/90/120/140/160/180/210.
• The remaining time may not be displayed correctly during fast forwarding or rewinding.