Hitachi VT-UX615A - Manual (Page 33)

PRE-TUNING THE VCR TUNER
33
The VCR will automatically store channels received in your area. It takes about 2 - 3 minutes.
After the channels are stored in memory, the channel with the lowest number appears in the
VCR's display.
7 Press GUIDE to return to regular viewing.
When automatic presetting of channels are finished
Press the CH (channel) button (or numbered buttons) to check the channels you can receive.
Note: If no channels have been set or a clear picture does not appear, check the antenna or
cable connection.
To add or erase channels
The auto channel set procedure may memorize channels that are blank, have snowy pictures,
or interference. You may skip these channels by erasing them. Very weak stations might not
be memorized at all. You may receive these stations by adding them.
1 Press the GUIDE button. Click to see remote control illustration.
The main on-screen menu will appear on the TV screen.
2 Press the (4) button to select the CHANNEL PRESET operation.