HP C4381-90100 - Manual (Page 149)

A-1
A
p
p
e
n
d
ix
A
:
T
e
ch
n
ic
a
l
S
p
e
ci
fic
a
tio
n
s
Appendix A:
Technical Specifications
Minimum System Requirements
Your computer should meet or exceed these requirements:
■ IBM or compatible Pentium/75 Mhz processor or above
■ Microsoft
®
Windows 95
®
or Windows NT
®
4.0
NOTE: For Windows NT, Service Pack 3 is required.
■ 16 MB RAM
■ Hard drive with at least 528 MB storage capacity (that is, with a
transfer rate of at least 800 kB/sec and disk access time of less than 20
msec)
■ 110 MB free hard drive space for installing software
10 MB free hard drive space for each minute of music to be recorded
■ High-speed parallel port (EPP or ECP) set to:
- IRQ 7 and I/O address 378 or
- IRQ 5 and I/O address 278
In Windows 95, to check the configuration settings of your parallel
port:
- Right-click on the My Computer icon
- Select Properties
- Select the Device Manager tab
- Highlight Printer Port
- Click on the Properties button
- Select the Resources tab
- Look at the numbers listed for Input/Output Range (I/O)
and Interrupt Request (IRQ)
If the numbers need to be changed, see the documentation that came
with your computer.