Harbor Freight Tools 67046 - Manual (Page 2)

SKU 67046 For technical questions, please call 1-800-444-3353. Page 2
saVe tHis manual
Keep this manual for the safety warn-
ings and precautions, assembly, operat-
ing, inspection, maintenance and cleaning
procedures. Write the product’s serial
number in the back of the manual near the
assembly diagram (or month and year of
purchase if product has no number). Keep
this manual and the receipt in a safe and
dry place for future reference.
important saFetY
inFormation
in this manual, on the labeling,
and all other information provid-
ed with this product:
this is the safety alert
symbol. it is used to alert
you to potential personal
injury hazards. obey all
safety messages that
follow this symbol to avoid
possible injury or death.
danger indicates
a hazardous
situation which, if not
avoided, will result in death or
serious injury.
Warning
indicates a
hazardous situation which, if
not avoided, could result in
death or serious injury.
caution, used
with the safety
alert symbol, indicates a
hazardous situation which, if
not avoided, could result in
minor or moderate injury.
notice is used to
address practices
not related to personal injury.
caution, without
the safety alert
symbol, is used to address
practices not related to
personal injury.
general power tool safety
Warnings
Warning read all safety
warnings and instructions.
Failure to follow the warnings and
instructions may result in electric
shock, fire and/or serious injury.
save all warnings and
instructions for future reference.
The term ″power tool″ in the
warnings refers to your battery-
operated (cordless) power tool.
Work area safety 1.
Keep work area clean and well lit. a.
Cluttered or dark areas invite acci-
dents.
do not operate power tools in ex-
b.
plosive atmospheres, such as in
the presence of flammable liquids,
gases or dust. Power tools create
sparks which may ignite the dust or
fumes.
Keep children and bystanders
c.
away while operating a power
tool. Distractions can cause you to
lose control.
electrical safety 2.
do not expose power tools to rain
or wet conditions. Water entering
a power tool will increase the risk of
electric shock.