Harbor Freight Tools 95964 - Manual (Page 4)

Page 4 SKU 95964 For technical questions, please call 1-800-444-3353.
store the chipper/shredder out of reach of children and other untrained per- 12.
sons. The Chipper/Shredder is dangerous in the hands of untrained users. Keep
children away from this product when in use. Store out of reach of children.
Maintain the chipper/shredder with care.
13. Properly maintained equipment is
less likely to malfunction and is easier to control. Do not use the Chipper/Shredder
if it is damaged. Tag it “Do not use” until repaired.
check for misalignment or binding of moving parts, breakage of parts, and
14.
any other condition that may affect the chipper/shredder’s operation. If
damaged, have the Chipper/Shredder serviced before using. Many accidents are
caused by poorly maintained tools.
Service must be performed only by qualified repair personnel.
15. Service or
maintenance performed by unqualified personnel could result in a risk of injury.
When servicing the chipper/shredder, use only identical replacement parts.
16.
Follow instructions in the “Inspection, Maintenance, And Cleaning” section of this
manual. Use of unauthorized parts or failure to follow maintenance instructions
may create a risk of electric shock or injury.
speciFic saFety rules and precautiOns
please nOte: your Warranty is voided if you do not put engine oil in
the Engine’s crankcase prior to its first use. Before each use, check
the oil level. Never run the Engine with low or no engine oil. Running the Engine
with low or no oil will permanently damage the unit.
The Engine’s Carburetor may need to be adjusted by a qualified mechanic for
1.
efficient high-altitude use.
Maintain labels and nameplates on the chipper/shredder.
2. These carry im-
portant information. If unreadable or missing, contact Harbor Freight Tools for a
replacement.
Make sure the Chipper/Shredder is located on a flat, level, sturdy surface
3.
capable of supporting the weight of the chipper/shredder and any additional
tools and equipment.
industrial applications must follow Osha guidelines.
4.
never stand on the chipper/shredder. 5. Serious injury could result if the machine
tips over.
never leave the chipper/shredder unattended when it is running.
6. Turn off the
Engine before leaving.