Harbor Freight Tools 95964 - Manual (Page 2)

Page 2 SKU 95964 For technical questions, please call 1-800-444-3353.
REV 07h, 08e
speciFicatiOns
Chipper Chute Capacity 1-1/4” Maximum Diameter
Chipper Dimensions 2-3/4” x 2-3/4” Square opening
Hopper Capacity 3/8” Maximum Limb Diameter
Hopper Dimensions 18” L x 14-3/4” W
Blade One Shredding Plate
4 Chipper Blades
Accessories Spark Plug Wrench
Ground Clearance 3-1/2” At Lowest Point
Wheel Type 7-1/2” Dia. x 2-1/4” W. Solid Rubber & Plastic
Engine Type Engine Family: 7YJ GS, 1631YC, EM
0.55 gallon, 5.5 HP, OHV Gas Engine
2007 E.P.A. Phase II
2007 California EVH & EVP
Oil Capacity: 20 ounces (0.6 liter)
the emission control system for this engine is warranted for standards set by
the u.s. environmental protection agency and by the california air resources
Board (also known as carB). For warranty information, refer to the last pages of
this manual.
nOte: this product requires oil and fuel to be added before
starting. attempting to start the engine without oil Will
ruin the engine and void the warranty.
save this Manual
You will need this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures, parts list and assembly
diagram. Keep your invoice with this manual. Write the invoice number on the inside of
the front cover. Write the product’s serial number in the back of the manual near the as-
sembly diagram, or write month and year of purchase if product has no number. Keep
this manual and invoice in a safe and dry place for future reference.