Hitachi VT-MX424A - Manual (Page 41)

DIGITAL DISPLAY
41
DIGITAL DISPLAY
1. PWR. (power) indicator- Lights up when the power is turned on.
2. indicator- Lights up when a timer recording or an IRT recording has been set. Flashes if
a tape is not inserted in the VCR even if you set a timer.
3. Cassette indicator- Lights up when there is a tape in the VCR.
4. VCR indicator- Indicates that the VCR is in the VCR position.
5. REC indicator- Lights up when the VCR is in the Recording mode. Flashes when a
recording has been paused.
6. Clock/Feature/Channel indicator- Indicates the current time (when the clock is set), and
briefly displays which feature the VCR is currently performing as the illustration.
SPECIAL FEATURES
REAL TIME TAPE COUNTER
• This shows the elapsed recording or playback time in hours, minutes, and seconds. (not in
the case of blank portion)
• The "-" indication will appear when the tape is rewound further than the tape counter position
"0:00:00".
AUTO REWIND
When the end of a tape is reached during recording, playback, or fast-forward, the tape will