Hitachi VT-MX424A - Manual (Page 17)

SETTING THE CLOCK
17
next step.
• Press the REW/ button to go back one step from the current step during steps [3] to [7].
2 Select the month
Press the PLAY/
or STOP/ button repeatedly until the desired month appears.
(Example: March - 03)
Then, the press F.FWD/ button.
3 Select the day
Press the PLAY/
or STOP/ button until the desired day appears. (Example: 1st - 01)
Then, press the F.FWD/ button.
4 Select the year
Press the PLAY/
or STOP/ button until the desired year appears.
(Example: 1997)
Then, press the F.FWD/ button.
5 Select the hour
Press the PLAY/
or STOP/ button repeatedly until your desired hour appears.
(Example: 05)
Then, press the F.FWD/ button.
6 Select the minute
Press the PLAY/
or STOP/ button repeatedly until your desired minute appears.
(Example: 40)
Then, press the F.FWD/ button.
7 Select "AM" or "PM"
Press the PLAY/
or STOP/ button to point to "AM" or "PM"
(Example: PM)
8 Start the clock
Press the RESET/EXIT or F.FWD/ button.
Although seconds are not displayed, they begin counting from 00 when you press the
RESET/EXIT or F.FWD/ button. Use this feature to synchronize the clock with the correct
time.
NOTES:
· When unplugging the AC-cord or if there is a power failure for more than 30 seconds, you
may have to reset the clock.
· If the display shows an abnormal reading or no reading, unplug the power cord for more than
30 seconds. Then plug it back in. And reset clock.
TO CHANGE CLOCK SETTING
1 ) Press the MENU button until the INITIALIZE menu appears.
2) Press the PLAY/
or STOP/ button to point to "SETTING CLOCK". Then, press the
F.FWD/ button.
3) Follow steps [2] to [8].