beautypg.com

English – haier HWF5300AW User Manual

Page 27

background image

Repairs to the washing machine must only be carried out by qualified personnel. Repairs

carried out by inexperienced persons may cause injury or serious malfunctioning.
Contact your local service center.

25

English

Problem

Possible Cause

Solution

Water in the washer

does not drain or

drains slowly

Drain hose is bent or

clogged.

The Button/Coin trap is

clogged.

Check height of drain hose

it should be less than 96"..

Clean and straighten the

drain hose.

Clean the Button/Coin trap.

See "Drain System" Adjust

height of drain hose.

Washer does not start

Electrical power cord

may not be plugged in or

connection may be loose.

Make sure plug fits tightly in

wall outlet.

Washer won’t spin

House fuse is blown, circuit

breaker tripped, or a power

outage has occurred.

Water supply tap is not

turned on.
Check that the door is firmly

shut.

Reset circuit breaker or

replace fuse. Do not

increase fuse capacity.

If problem is a circuit

overload, have it corrected

by a qualified electrician.
Turn on water supply tap.
Close the door and Touch

the Start/Pause pad. After

Touching the Start/Pause

pad, it may take a few

moments before the clothes

washer begins to spin.

Long wash cycle time

The washing time may vary

with the amount of laundry,

water pressure, water

temperature, and other

using conditions.

If imbalance is detected or if

the suds removing program

operates, the wash time

shall be increased.

Washer odor

Does not use HE detergent.

Stains under the door seal.

Use only HE detergent.
Wipe off the stains.
Leave door ajar after use.

The door cannot be

unlocked by touching the

Start/Pause pad to stop the

washer.

The water temperature or

the level is high.

Drain the water by using

Rinse&/Spin cycle. (The

door may be opened after

the Rinse&/Spin cycle is

complete.)

The water supply and

drainage does not stop

Check that the height of the

drain hose is below 30".

Check if the end of the drain

hose is in the water.

Adjust the height of the

drain hose.
Place the end of the drain

hose away from the water

surface.