Husqvarna 385XP - Manual (Page 37)

English – 37
TECHNICAL DATA
Technical data
Note 1: Noise emissions in the environment measured as sound power (L
WA
) in conformity with EC directive 2000/14/EC.
Note 2: Equivalent sound pressure level, according to ISO 7182, is calculated as the time-weighted energy total for noise pressure
levels under various working conditions with the following time distribution: 1/2 idling, 1/2 max. load.
Note 3: Equivalent vibration level, according to ISO 7505, is calculated as the time-weighted energy total for vibration levels under
various working conditions with the following time distribution: 1/2 idling, 1/2 max. load.
385XP
Engine
Cylinder displacement, cm 3 84,7
Cylinder bore, mm 54
Stroke, mm 37
Idle speed, rpm 2700
Power, kW/ rpm, Europe: 4,6/9600
Power, kW/ rpm, Australia: 4,6/9600
Ignition system
Manufacturer of ignition system SEM
Type of ignition system CD
Spark plug NGK BPMR 7A/Champion RCJ 7Y
Electrode gap, mm 0,5
Fuel and lubrication system
Manufacturer of carburettor Tillotson
Carburettor type HS 296A
Fuel tank capacity, litre 0,9
Oil pump capacity at 9,000 rpm, ml/min 6-24
Oil tank capacity, litre 0,5
Type of oil pump Automatic
Weight
Chain saw without bar or chain, empty tanks, kg 7,0
XPG: 7,2
Noise emissions
(see note 1)
Sound power level, measured dB(A) 113
Sound power level, guaranteed L
WA
dB(A) 114
Sound levels
(see note 2)
Equivalent sound pressure level at operator’s ear, measured
according to relevant international standards, dB(A)
102
Europe: 102
Australia: 103
Vibration levels
(see note 3)
Front handle, m/s
2
5,7
Rear handle, m/s 2 8,0
Chain/bar
Standard bar length, inch/cm 18"/46
Recommended bar lengths, inch/cm 18-28”/46-70
Usable cutting length, inch/cm 17-27"/43-68
Chain speed at max. power, m/sec 21,4
Pitch, inch/mm 3/8" /9,52
Thickness of drive links, inch/mm 0,058/1,5
Number of teeth on drive sprocket 7