HP 318 - Manual (Page 47)

Sharing and printing images 39
In the HP Automatic Image Unload Options window, you can
disable the automatic unload feature. To turn the feature on
again, open the Automatic Image Unload Options file in the
ArcSoft PhotoImpression folder.
The automatic unload software stores your images in a folder
called Macintosh HD:ArcSoft PI:Photos:
date. You can change
only the final folder (the date) in that path.
Make sure you know where your images are stored on your
computer’s hard disk. By default, images are stored in the
PhotoImpression folder, for example Macintosh HD:ArcSoft
PI:Photos:2002.07.04. If you ever decide to delete the ArcSoft
PI folder, you must first move your images to another folder. If
you do not, your images will be deleted from the hard disk
when you delete the PhotoImpression folder.
Unloading images without using
the software
If you are away from home, you can unload images to a computer
that does not have the HP Automatic Image Unload software
installed on it.
Note Make sure that the computer has a USB port and
that its operating system is Windows 2000 or
Windows Millennium Edition or later, or Macintosh
OS 8.6 or later.
To unload images to a Windows or Macintosh computer
1 Change the camera's PC Connect Mode to Disk Drive. For
more information, see “Changing the PC Connect Mode
setting” on page 35.
2 Connect the camera to the Windows or Macintosh computer
with the USB cable.
3 Turn the camera on. The letters PC appear in the status LCD
to indicate that the camera is connected to the computer. The
computer recognizes the camera as a disk drive.
4 Use the following procedure to access your images as files: