Hawking Technology 202-10248-01 - Manual (Page 13)

GS108T Smart Switch Hardware Installation Guide
Introduction 1-3
v1.0, March 2007
• Embedded HTTP server for Web-based management
• Supports port-setting function, enabling user to enable/disable each port, and set speed,
duplex mode and device flow control
• Auto-Discovery support with application program for discovering and managing the smart
switches on the network
• Flash upgrade, configuration backup/restore, and factory reset
• Full compatibility with IEEE standards:
• IEEE 802.3i (10BASE-T)
• IEEE 802.3u (100BASE-TX)
• IEEE 802.3z/ab (1000BASE-X, 1000Base-T)
• IEEE 802.3x (full-duplex flow control)
• Auto-sense and auto-negotiate for all ports
• Auto Uplink™ on all ports for the right connection sense
• Integrated address Look-Up Engine supports 8K absolute MAC addresses
• Full- and half-duplex functions for all 10/100/1000 ports
• Store-and-Forward transmission to remove bad packets from the network
• Active flow control to minimize packet loss/frame drops:
• Half-duplex back-pressure control
• Full-duplex IEEE 802.3x pause frame flow control
• LED indicators for port status monitoring:
• Power LED indicates power on/off status
• Link/Act LED indicates link status and activity
• Flexible installation:
• Standalone desktop installation