Troubleshooting, Inspection, maintenance, and cleaning, Please read the following carefully – Harbor Freight Tools MOTORCYCLE LIFT 94813 User Manual
Page 11
SKU 94813 For technical questions, please call 1-800-444-3353
PAGE 11
INSPECTION, MAINTENANCE, AND CLEANING
1.
Before each use: Inspect the general condition of the Motorcycle Lift. Check for
cracked, worn or damaged parts, loose or missing parts, low or no hydraulic oil, and
any other condition that may affect the tool’s safe operation. If a problem occurs,
have the problem corrected before further use.
Do not use damaged equipment.
2.
To clean: Use a damp cloth and a mild detergent. Do not use solvents or other
flammable agents.
3.
When storing: Keep the Motorcycle Lift and its accessories in a clean, dry, safe
location out of reach of children and other unauthorized people.
4.
CAUTION! All maintenance, service, and repairs not discussed in this manual
should only be performed by a qualified service technician.
TROUBLESHOOTING
Problem
Possible Solution
Motorcycle Lift “fades”, allowing a
load to slowly lower on its own.
1. Make sure the unit’s 1,200 pound lifting capacity is not being
exceeded.
2. Check all air connections for leaks.
3. The Air Foot Valve (48) may be leaking. A technician should
investigate and replace o-rings or entire unit as necessary.
4. If none of the above solutions correct the problem, have a
qualified service technician examine the unit. Do not use the
unit until completely repaired.
PLEASE READ THE FOLLOWING CAREFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND
ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE
MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY
OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS
OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY
STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY
CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER AS-
SUMES ALL RISKS AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGI-
NAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER
INSTALLATION OF REPLACEMENT PARTS THERETO.