haier TFT-LCD - Manual (Page 29)

Time Functions
On/off timer
Clock setting
Clock setting and timer on/off functions
1
Press button and VOL+/-
button, and the TIME menu display
on the Screen.
MENU
2
Press CH+/- buttons select
"Clock",press VOL -/+ buttons to
select hour or minute position, then
press the digital buttons to set the
value of hour or minute;
1
Press CH+/- buttons to select
"On time", press VOL-/+buttons
to select hour or minute position;
then press the digital buttons to
set the value of hours or
minutes.
2
Press CH+/- buttons to select
"On prog", then press the digital
buttons to select your desired
channel.
Using on/off timer function, the TV set can automatically
turn on to a preset program or shut down in a preset time.
The clock will only work if the TV set is turned on or
in standby. When the set is disconnect from the
power supply or is turned off by the main power on
the rear panel, the clock loses power and will need
to be reset when the power is reconnected.
26
Clock --:--
Off Time --:--
On Time --:--
On Prog 000
Remind Time --:--
Remind Prog. 000
B
C
A
Clock --:--
Off Time --:--
On Time --:--
On Prog 000
Remind Time --:--
Remind Prog. 000
B
C
A
NOTE:
1 .If Clock option is setting,
the time you set for Off Timer
/On Timer will be a point
of time. Otherwise, if Clock
is not set, the time you set for
Off Time/On Time will be a
period of time.
2 .Sleep Off/ Off Time can not
be set at simultaneously.
If both of the two are set, the
later setup will be operation.
3
Repeat step 1-2 to set Off time .
Indication will appear on the screen 1 minute prior to
expiry of set time.
Suppose Timer Off is set, and indication is as follows:
Timer Off
When the above indication appears on the screen,
set time may be changed if VOL+/- button is pressed.