Hunter Fan 44760 - Manual (Page 14)

26
26 PROGRAMMING
7-Day Programming
Step 1 ■ Slide Power Switch to ON.
■ Press to select HEAT or COOL to program the corresponding system.
(Auto may be selected, but does not affect the programming steps)
Step 2 ■ Press to enter program mode, display shows weekday programs.
■ Press 2 times to reach the Monday program.
Step 3 ■ The Program hour and AM or PM indicator are flashing. Press
or to change the hour.
Step 4 ■ Press again to change to the minute position. The current minute will
be flashing.
■ Press or to change the minute.
on off em
system
program
prog-day
Monday
System
AM
Fan
Temp
1 2 3 4
Thursday
System
AM
Fan
Temp
2
Monday
System
AM
Fan
Temp
1 2 3 4
program
41652_model44760_web.pmd
27
Step 5 ■ Press again to change to the program temperature. The current
temperature will be flashing.
■ Press or to change the temperature.
Step 6 ■ Press to move to programs 2, 3 and 4.
■ Repeat Steps 3 through 5 to complete the programs for Monday.
Step 7 ■ Press to change to the next day’s programs.
■ Repeat Steps 3 through 6 to complete the selected day’s programs.
■ Continue repeating Steps 3 through 7 to program all 7 days of the week.
Step 8 ■ When finished, press to return to normal mode.
■ After 15 seconds, the thermostat will return to normal mode automatically.
Step 9 ■ Change to the other system and repeat steps 2 through 8 above.
Monday
System
AM
Fan
Temp
1 2 3 4
program
program
prog-day
system
ret-clear