Hunter Fan 44760 - Manual (Page 12)

22
22 PROGRAMMING
Personal Program Schedule (continued)
Cooling
Day Prog. 1 Prog. 2 Prog. 3 Prog. 4
Mon. Time Temp Time Temp Time Temp Time Temp
Tues. Time Temp Time Temp Time Temp Time Temp
Wed. Time Temp Time Temp Time Temp Time Temp
Thurs. Time Temp Time Temp Time Temp Time Temp
Fri. Time Temp Time Temp Time Temp Time Temp
Sat. Time Temp Time Temp Time Temp Time Temp
Sun. Time Temp Time Temp Time Temp Time Temp
41652_model44760_web.pmd
23
23 Programming
■ Your thermostat can be programmed for weekdays and week-
ends, have unique programs for all 7 days, or the same pro-
gram for everyday. Use Weekday/Weekend Programming on
page 24, 7-day Programming on page 26, or Everyday Pro-
gramming on page 28 to enter or revise programs to match
your Personal Program Schedule.
■ Familiarize yourself with Manual Programming, so that you
can easily modify your programs as your comfort needs
change. Follow the steps below to change the program times
and temperatures.
NOTE: 1) The program time can be set in 10 minute incre-
ments, and remains the same for both Heat and
Cool programs.
2) The program temperature can be set in incre-
ments of 1 ° F (1 ° C).
3) The Heat setpoint can not be set higher than the
Cool setpoint, and the Cool setpoint can not be
set lower than the Heat setpoint.
4) If the system selector is in AUTO mode, the
current operating mode will be used for pro-
gramming.
5) After 15 seconds without a key press, the ther-
mostat will return to normal display mode.
6) When setting the program time, note the AM /
PM indicator.
7) With the Auto Recovery feature enabled, you do
not need to set your comfort program times
early. Auto Recovery will determine how early to
turn your system on, so that the room is com-
fortable at the program time.