Harbor Freight Tools 92652 - Manual (Page 7)

Page 7 SKU 92652 For technical questions, please call 1-800-444-3353
•
Where ventilation is questionable, have a qualified technician take an air sampling
to determine the need for corrective measures. Use mechanical ventilation to
improve air quality. If engineering controls are not feasible, use an approved respi-
rator.
• Work in a confined area only if it is well ventilated, or while wearing an air-supplied
respirator.
• Follow OSHA guidelines for Permissible Exposure Limits (PEL’s) for various fumes
and gases.
• Follow the American Conference of Governmental Industrial Hygienists recommen-
dations for Threshold Limit Values (TLV’s) for fumes and gases.
• Have a recognized specialist in Industrial Hygiene or Environmental Services
check the operation and air quality and make recommendations for the specific
welding or cutting situation.
10. Always keep hoses away from welding/cutting spot. Examine all hoses and
cables for cuts, burns, or worn areas before each use. If any damaged areas are
found, replace the hoses or cables immediately.
11. Read and understand all instructions and safety precautions as outlined in the
manufacturer’s manual for the material you will weld or cut.
12. Proper cylinder care. Secure cylinders to a cart, wall, or post, to prevent them from
falling. All cylinders should be used and stored in an upright position. Never drop or
strike a cylinder. Do not use cylinders that have been dented. Cylinder caps should be
used when moving or storing cylinders. Empty cylinders should be kept in specified
areas and clearly marked “empty.”
13. Never use oil or grease on any inlet connector, outlet connector, or cylinder
valves.
14. Use only supplied Torch on this Air Plasma Welder/Cutter. Using components from
other systems may cause personal injury and damage components within.
WARNING! This product, when used for welding and similar applications, contains
or produces a chemical known to the State of California to cause cancer and birth de-
fects (or other reproductive harm). (California Health & Safety Code § 25249.5,
et seq. )
WARNING! People with pacemakers should consult their physician(s) before us-
ing this product. Electromagnetic fields in close proximity to a heart pacemaker could
cause interference to, or failure of the pacemaker.
GROUNDING
This Air Plasma Cutter requires a 3-prong, 230 VAC, polarized, twist-lock plug (not sup-
plied). This plug must be installed by a qualified electrician.