Hitachi VT-FX602S - Manual (Page 58)

TIMER RECORDING - 58 -
TAPE SELECT ~T130
REPEAT PLAY
RENTAL
AUTO RETURN
AUDIO OUT
TV STEREO [ON]
SAP
4 Select "AUTO RETURN" to [AUTO]
Press SELECT button so that [AUTO] will appear next to "AUTO
RETURN".
VCR SET UP
TAPE
SELECT ~T130
REPEAT PLAY
RENTAL
AUTO RETURN [AUTO]
AUDIO OUT
TV STEREO [ON]
SAP
5 To return to TV mode
Press MENU button.
WATCH THE RECORDED PROGRAM
Press POWER button to turn on the VCR. Then, press PLAY button.
JUST-IN TIME RECORDING
This function allows you to fully utilize the available tape length for timer
recording. The VCR calculates the remaining tape amount and then
adjusts the tape speed from SP to SLP as needed.
If it is suspected that the end of the tape will be reached before the
reserved program ends (as long as SP mode is kept all the way), set
recording mode to AUTO. This function is available only with Program No.
1 (Timer Recording).
The auto mode starts recording in SP mode. The internal circuit compares
the rest of the program against the available tape length. If the internal
circuit determines that the available tape is not long enough to record the
program in the SP mode, the Recording mode is automatically changed to
SLP mode. This will assure coverage of the desired program before the
end of the tape is reached.