Huffy DH9300 - Manual (Page 10)

10
P/N 211689C 05/03
IMPORTANT! Holes in top (1) and bottom pole (3) sections MUST align to
correctly position elevator system toward playing surface.
While maintaining alignment, bounce assembly and lower section (3) together
as shown until they no longer move toward taped reference mark.
NOTE: Pole sections should have a 3-1/2" (9 cm) minimum overlap.
1
2
3
3.
WOOD SCRAP
(NOT SUPPLIED)
TAPE REFERENCE
MARK
1/2" (1.27 cm) DIAMETER
HOLES OF TOP POLE