haier HRF-305 - Manual (Page 18)

Installation Sequences Installation Sequences
This is the installation sequence of right open cabinet. HRF-305
Move the hinge from right to left for the left open cabinet, and install accordingly.
1. Basic Dimensions
=====Refrigerator cabinet: Width (outside) Width (inside)
=====Confirm the right angle of every refrigerator cabinet
=====Confirm the refrigerator cabinet air inlet and outlet
=====refrigerator cabinet door (Upper): Width
◊
Height
=====Refrigerator cabinet door (Lower): Width ◊
Height
SMM
RTM
NTTSú
NTUO
RQM
RQQ
NTTP
RVS
NMVN
TMQ
2. Preparations before freezer cabinet installation
===== Clearance adjusting sheet is already connected to hinge. (4 pieces)
They have to be take off when T18 cabinet is used
When you install T15 furniture, they don’t need to be taken off. If you want to open from the left, swap the
upper and the lower parts.
===== When you change to left open door, install the hinge in the left.
The hinge positions shall be swapped.
L/Upper R/Upper
L/Lower R/Lower
===== Confirm the fixing plate in lower part of component is installed well.
===== Loose the 4 fixing screws in the upper gasket sheet so that it can move back and forth.
Draw the cord
from the hold at
the back of the
refrigerator.
Put the
refrigerator
into the
cabinet.
P P
NQ NQ
NS NS
A
A
B
B
32 33