HP Refrigerated Recirculating Chillers - Manual (Page 2)

Section 1 - General Information
1.1 Warranty
1.2 Unpacking
1.3 Package Contents
1.4 Description
1.5 Specifications and Pump Performance
Section 2 - Set Up
2.1 Location
2.2 Reservoir Fluids
2.3 Pump, Hoses and Couplings
2.4 Setting Up a Closed System or Cooling Coil to the Chiller
2.5 Setting Up an Open Bath System to the Chiller
Section 3 - Operation
3.1 Power Requirements
3.2 Temperature Setting and Adjustments
3.3 Selection of Celsius or Fahrenheit
3.4 Setting the Readout High Limit
3.5 Controller Display Messages
3.6 Draining the Unit
3.7 Controller Default Settings
Section 4 - Diagram of Models
Section 5 - Maintenance
5.1 Standard Magnetic Drive Centrifugal Pump Motor
5.2 Positive Displacement High Pressure Pump Motor
5.3 Fluid Filter Included With High Pressure Pump
5.4 Refrigeration Air Vents & Air Filter
Section 6 - Troubleshooting
6.1 Unit Disabled
6.2 No Pumping
6.3 Insufficient Pumping
6.4 No Cooling or Insufficient Cooling
Section 7 - Service and Technical Support
Section 8 - Replacement Parts
2
This symbol marks chapters and sections of
this instruction manual which are particularly
relevant to safety.
When attached to the unit, this symbol draws
attention to the relevant section of the
instruction manual.
This symbol indicates hazardous voltages
may be present.
Table of Contents