Hampton Direct HI300 - Manual (Page 17)

Hampton HI300 Wood Cast Insert 17
INSTALLATION
Rear View of Unit
Stop! Read Carefully.
Enamel & Cast components are very fragile.
Use extreme care when handling.
4-1/2" - 4-3/4" boths sides rear inside edge to fi rebox.
Important: Verify gap between cast and door did not
change after rear adjustments have been made.
Carefully open door slowly, to ensure that the door does
not rub against cast sides.
* These are just recommended measurements.
Right Side
Cast
Left Side
Cast
1/4" (approx.) between both sides of door
and cast.
Ashlip
1/8" - 1/4" (approx.) for both sides, between
ashlip and bottom of side cast.