Hunter Fan Grandview 23923 - Manual (Page 6)

6
42773-01 • 06/18/09 • Hunter Fan Company
Steps 3-2 – 3-3
Downrod
Canopy
Set Screw
WARNING: Fan may fall if not assembled as directed in these
installation instructions.
3-1. Unbundle the wires from the fan.
3-2. Remove the shipping spacer from the top of the motor housing.
For Standard or Angle mounting:
3-3. To assemble fan to hang down from a flat or angled ceiling, insert
the downrod through the canopy. Feed the wires from the fan
through the downrod.
3-4. Loosen the square head set screw on the adapter to install the
pipe and ball assembly. Note: When the pipe and ball assembly
is fully installed, 2-3 threads on the pipe will still be visible; this is
normal. Securely retighten the set screw with a wrench or pliers.
CAUTION: The adapter has a special coating on the threads. Do
not remove this coating; the coating prevents the downrod from
unscrewing. Once assembled, do not remove the downrod.
3-5. Raise the fan and place the hook on the ceiling plate through the
U-shaped hole in the rim.
Step 3-4
U-shaped
Hole
3 • Assembling and Hanging the Fan
3 • Assemblage et suspension du ventilateur