Husqvarna 345 - Manual (Page 34)

34 – English
TECHNICAL DATA
Technical data
340 345 350
Engine
Cylinder volume, cu.in/cm 3 2,49/40,8 2,75/45,0 3,15/51,7
Cylinder bore, inch/mm 1,57/40 1,65/42 1,77/45
Stroke, inch/mm 1,28/32,5 1,28/32,5 1,28/32,5
Idle speed, rpm 2700 2700 2700
Power, kW/ rpm 2,0/9000 2,2/9000 2,3/9000
Ignition system
Manufacture SEM SEM SEM
Type of ignition system CD CD CD
Spark plug
NGK BPMR 7A/
Champion RCJ 7Y NGK BPMR 7A/
Champion RCJ 7Y NGK BPMR 7A/
Champion RCJ 7Y
Electrode gap, inch/mm 0,02/0,5 0,02/0,5 0,02/0,5
Fuel and lubrication system
Manufacturer of carburettor Zama Zama Zama
Carburettor type C3-EL18 C3-EL18 C3-EL18
Fuel tank capacity, US pint/litre 1,06/0,5 1,06/0,5 1,06/0,5
Oil pump capacity at 9,000 rpm, ml/min 9 9 5-12
Oil tank capacity, US pint/litre 0,53/0,25 0,53/0,25 0,53/0,25
Type of oil pump Automatic Automatic Automatic
Weight
Chain saw without bar or chain, empty tanks, Lbs/kg 10,3/4,7 10,3/4,7 10,6/4,8
Chain/bar
Standard bar length, inch/cm 13"/33 13"/33 13"/33
Recommended bar lengths, inch/cm 13-20"/33-50 13-20"/33-50 13-20"/33-50
Usable cutting length, inches/cm 12-19"/31-49 12-19"/31-49 12-19"/31-49
Chain speed at max. power, m/sec 17,3 17,3 17,3
Pitch, inch/mm 0,325/8,25 0,325/8,25 0,325/8,25
Thickness of drive links, inch/mm 0,050/1,3 0,050/1,3 0,050/1,3
0,058/1,5 0,058/1,5 0,058/1,5
0,063/1,6 0,063/1,6 0,063/1,6
Number of teeth on drive sprocket 7 7 7