haier HDB18EB - Manual (Page 8)

Understanding the Dishwasher Control Panel:
Power Button:
• Press "POWER" button in to turn the power "ON".
• Press this button again to turn the power "OFF".
Note: You will see the "Power On Indicator Light" lit when the unit is on.
“Rinse “ Indicator Light:
• When “RINSE ” indicator light is lit, this means the rinse aid
detergent is empty in the rinse aid compartment. You need to
refill rinse aid at this time.
Door Latch:
• To lock the door, push the door with
light force until you hear the “Click.”
• To unlock the door, squeeze the door
latch and pull towards you.
Wash Selector Knob:
• When selecting a wash cycle, turn the knob
"CLOCKWISE" to your desired setting by matching
the knob "Pointer" symbol to the cycle "dot" symbol.
Once both are lined up, press "Power" button to
begin the wash process. (You will hear "Click" and
the wash cycle will start automatically.) A “Click” will
signify the automatic start at the wash cycle.
Warning: The wash selector knob is designed to work only in a
clockwise direction. DO NOT turn the knob "COUNTER
CLOCKWISE." Turning in a counter clockwise direction
may cause damage to the wash selector.
Selecting Wash Cycles
• Select the appropriate cycle based on the load and soil level. For your conve-
nience, the dishwasher has Pots & Pans, Normal, Light Wash, Glassware and
Rinse & Hold wash cycles that you can select from.
Using Your Dishwasher
POWER
√
RINSE
RINSE& HOLD RINSE& HOLD
POTS & PANS POTS & PANS
GLASSWARE GLASSWARE
NORMAL WASH NORMAL WASH
LIGHT WASH LIGHT WASH
7
English
Power
indicator Power
indicator
Rinsee Rinsee
ON ON
OFF OFF
Haier Haier RINSE& HOLD RINSE& HOLD
POTS & PANS POTS & PANS
GLASSWARE GLASSWARE
NORMAL WASH NORMAL WASH
LIGHT WASH LIGHT WASH
HDB18EB HDB18EB