beautypg.com

haier HDB18EB User Manual

Page 27

background image

26

Dishwasher is leaking:

• Dishwasher is not properly leveled.

You need to place the dishwasher on a flat hard surface. Avoid an uneven
surface.

• Make sure the dishwasher is properly leveled . (See the installation instructions)

• Do not overfill the detergent or the rinse agent dispenser because it will cause

oversudsing and overflowing.

• Do not use regular type hand or dish washing detergent in the detergent

dispenser. These types of detergents are not recommended for dishwasher use.

Dishwasher will not fill:

• Check the water supply.

Make sure that the water supply is in "ON" position.

• Check water pressure.

Make sure the water pressure is at the proper level. (Between 20 – 120 PSI)

Water found under the filter:

• A small amount of water found under the filter area after completion of the cycle

is normal.

Detergent found in the compartment:

• Do not load items too close to the detergent compartment. This may block the

automatic release of the detergent.

• Do not use old or caked/dried detergent in the compartment because it will not

dissolve properly and will leave a sandy residue on dishware.

Dishwasher is running for too long:

• The temperature of incoming water is below 120˚F. Raising your water heater

setting will help to shorten the time of operation.

• Call the Haier Customer Satisfaction Center if this does not resolve the problem.

English