Husqvarna OPERATORS MANUAL CS 2159 - Manual (Page 3)

CONTENTS
English – 3
Contents
KEY TO SYMBOLS
Symbols on the machine: ..................................... 2
Symbols in the operator’s manual: ....................... 2
CONTENTS
Contents ............................................................... 3
INTR ODUCTION
Dear Customer , .................................................... 4
WHA T IS WHAT?
What is what on the chain sa w? ........................... 5
GENERAL SAFETY PRECA UTIONS
Bef ore using a new chain saw .............................. 6
Important .............................................................. 6
Always use common sense .................................. 6
Personal protective equipment ............................. 7
Machine ′ s safety equipment ................................. 7
Cutting equipment ................................................ 10
ASSEMBL Y
Fitting the bar and chain ....................................... 16
FUEL HANDLING
Fuel ...................................................................... 17
Fuelling ................................................................. 18
Fuel safety ............................................................ 18
ST ARTING AND STOPPING
Star ting and stopping ........................................... 19
W ORKING TECHNIQUES
Bef ore use: ........................................................... 21
General working instructions ................................ 21
How to avoid kickback .......................................... 28
MAINTENANCE
Gener al ................................................................. 29
Carburettor adjustment ......................................... 29
Checking, maintaining and servicing chain saw
safety equipment .................................................. 30
Muffler .................................................................. 32
Starter .................................................................. 33
Air filter ................................................................. 34
Spark plug ............................................................ 34
Lubricating the bar tip sprocket ............................ 34
Needle bearing lubrication ................................... 34
Adjustment of the oil pump ................................... 35
Cooling system ..................................................... 35
”Air Injection” centrifugal cleaning ........................ 35
Winter use ............................................................ 36
Heated handles .................................................... 36
Maintenance schedule ......................................... 37
TECHNICAL D ATA
T echnical data ...................................................... 38
Bar and chain combinations ................................. 39
Saw chain filing and file gauges ........................... 39
EC-declaration of conformity ................................ 40