Honeywell FocusPRO TH6000 Series - Manual (Page 21)

FocusPRO ® TH6000 Series
19 69-1921EFS—03
About your new thermostat
ENGLISH
In case of difficulty
Heating or
cooling system
does not respond • Press SYSTEM button to set system to Heat. Make sure the temperature
is set higher than the Inside temperature.
• Press SYSTEM button to set system to Cool. Make sure the temperature
is set lower than the Inside temperature.
• Check circuit breaker and reset if necessary.
• Make sure power switch at heating & cooling system is on.
• Make sure furnace door is closed securely.
• Wait 5 minutes for the system to respond.
“Cool On” or
“Heat On” is
flashing • Compressor protection feature is engaged. Wait 5 minutes for the system
to restart safely, without damage to the compressor (see page 15).