Harbor Freight Tools 99741 - Manual (Page 5)

For technical questions, please call 1-800-444-3353;
troubleshooting section at end of manual.
SKU 99741 PAGE 5
Pressure washer use and care
Do not use the pressure washer if 1.
the switch does not turn it on and off.
Any pressure washer that cannot be
controlled with the switch is danger-
ous and must be repaired.
Disconnect the plug from the power
2.
source before making any adjust-
ments, changing accessories, or
storing pressure washers. Such pre-
ventive safety measures reduce the
risk of starting the pressure washer
accidentally.
Store idle pressure washers out of
3.
the reach of children and do not allow
persons unfamiliar with the pressure
washer or these instructions to oper-
ate the pressure washer. Pressure
washers are dangerous in the hands
of untrained users.
Maintain pressure washers. Check
4.
for breakage of parts and any other
condition that may affect the pres-
sure washer’s operation. If damaged,
have the pressure washer repaired
before use. Many accidents are
caused by poorly maintained pres-
sure washers.
Use the pressure washer, acces-
5.
sories etc. in accordance with these
instructions, taking into account the
working conditions and the work to
be performed. Use of the pressure
washer for operations different from
those intended could result in a haz-
ardous situation.
Service
Have your pressure washer serviced
by a qualified repair person using
only identical replacement parts. This
will ensure that the safety of the pres-
sure washer is maintained.
Specific Pressure Washer Safety
Warnings
Maintain labels and nameplates on 1.
the equipment. These carry impor-
tant safety information. If unreadable
or missing, contact Harbor Freight
Tools for a replacement.
Risk of injection or severe injury.
2.
Keep clear of Nozzle. Do not direct
discharge stream at people or ani-
mals. Keep the work area clear of all
people and animals.
Use the right product for the right
3.
job. There are certain applications
for which this product was designed.
Do not use small equipment, tools, or
attachments to do the work of larger
industrial equipment, tools, or attach-
ments. Do not use this product for a
purpose for which it was not intend-
ed.
This product must continuously run
4.
with cold water only. Never use hot
water. Dry running will cause serious
damage to the seals. Make sure the
water supply used for the Pressure
Washer is not dirty, sandy, and does
not contain any corrosive chemical
products.
To avoid electrical shock, never start
5.
and run the Pressure Washer in the
rain. Never allow water to leak inside
the Body of the Pressure Washer.
Do not direct discharge stream at the
Pressure Washer itself or at other live
electrical equipment.
Do not allow the GFCI Plug to be-
6.
come wet. Always place the GFCI