Pre-operation check, Engine oil, 28 pre-operation check – HONDA EU 1000i User Manual
Page 30
28
PRE-OPERATION CHECK
ENGINE OIL
COVER SCREW
AMBIENT TEMPERATURE
SAE VISCOSITY GRADES
LEFT SIDE
MAINTENANCE COVER
Check the oil level BEFORE EACH
USE with the generator on a level
surface and the engine stopped.
Use 4-stroke motor oil that meets
or exceeds the requirements for
API service classification SJ or
later (or equivalent). Always check
the API SERVICE label on the oil
container to be sure it includes
t h e
l e t t e r
S J
o r l a t e r ( o r
equivalent).
SAE 10W-30 is recommended for general, all-temperature use. Other
viscosities shown in the chart may be used when the average
temperature in your area is within the indicated range.
Loosen the cover screw and remove the left side maintenance cover.
Place the generator on a level surface.
1.
2.
06/12/21 11:27:39 31ZT3604_029