Hotpoint HDA497K - Manual (Page 5)

●
For PLATE WARMER cycle:
a. Load clean plates and dishes to
be warmed.
b. Select DRYING HEAT–ON
drying option.
c. the door unlatched.
LIGHT WASH
ON m
OFF
.
HOLO
PLATE WARMER
■
d. Slowly turn Cycle Indicator Dial
clockwise to PLATE WARMER
position.
e. Latch the door to start the
What happens in each cycle
Cycle selection hints
It is important to follow the loading RINSE HOLD—For rinsing
instructions on pages 8 and 9. partial loads which will be washed
NORMAL WASH—For most
later. Select DRYING
loads of everyday dishes, glasses
OFF drying option. not use
detergent.
and cookware with medium soils.
LIGHT WASH–For dishes
PLATE WARMER—For warming
clean dishes and serving plates for
that have been pre-rinsed before
loading. Also, for washing
soiled dishes with soils
that have not dried on.
Wash
Water Use Cycle Time
wash Gallons
minutes) Cycle Sequence
WASH 10.7
LIGHT WASH 8.9 51
RINSE HOLD 5.1 15
*DRYING HEAT—ON: Add 28 minutes.
the serving of hot food. -
●
You’ll hear occasional clicking
sounds:
–Soft food disposer shredding
action.
—Drain valve opening to pump
water out.
—Timer control as cycle
progresses.
—Detergent cup opening.
During the drying period:
—The motor stops.
—Water vapor is released through
the vent under the door handle.
It maybe visible.
5