Hitachi DZ-B35A - Manual (Page 89)

English
89
Program
WHAT IS “PROGRAM”?
Program refers to an assembly of scenes recorded on the same date regardless of whether they are
movie or still.
1<>2/
SWITCHING TO THUMBNAIL DISPLAY OF SPECIFIC DATE (SELECT)
Since the scenes recorded on this DVD video camera/recorder are collected as “programs” for each
recording date, selecting a program will allow you to display only the scenes on a specific date.
1
Press the DISC NAVIGATION button.
2
Press the MENU button.
3
Use the f/e/d/c/A buttons to
choose “Select” on the “Program” menu
screen, and then press the A button.
4
Select the program to
be displayed, and then
press the A button.
The Disc Navigation
screen of the selected
program will appear.
Note
:
• Pressing the C button on the “Select Program” screen
will restore the Disc Navigation screen.
• If a disc recorded on another device is loaded in this
DVD video camera/recorder, the program may not be
a collection of recordings on the same date.
• If you change the video quality or switch the wide
mode with a +RW, multiple programs will be produced
even if they are recorded on the same date.
9:00AM 10:20AM 11:45AM 1:30PM 5:20PM 8:00PM Movie Movie Still Still Movie Still
Recorded on September 10
Program No. 1
Scene No. 1 Scene No. 2 Scene No. 3 Scene No. 4 Scene No. 5 Scene No. 6
S e l e c t P r o g r a m
0 1 8 / 3 0 / 2 0 0 6
0 2 9 / 1 0 / 2 0 0 6
A l l P r o g r ams
ENTER RETURN
0 3 9 / 3 0 / 2 0 0 6
0 01 / 00 8 0 3 9 / 3 0 / 2 0 0 6
PLAY