Hitachi DZ-B35A - Manual (Page 123)

English
123
CREATING DVD-VIDEO USING IMAGES RECORDED ON DISC
You can use the images recorded on the DVD video camera/recorder to create a disc that can be
viewed on DVD recorders/players.
* A DVD-RW/DVD-R/+RW recorded on this DVD video camera/recorder must be finalized on this
DVD video camera/recorder.
1
Insert a disc with the recorded images to be
saved into the DVD video camera/recorder,
and connect the DVD video camera/recorder
to a USB port of PC.
2
Start ImageMixer 3.
When ImageMixer 3 starts up, the launcher
shown below will appear: Click “Author
DVD-Video”.
3
Click “Create New DVD”.
4
Setting up project.
Set up a project. You can set up the
designated save location of edited contents
and image quality.
Be sure to choose “NTSC” for the video
system.
The “PAL” system is used in Europe.
After setting up the project, click the “OK”
button.
5
The screen for choosing the device to be read
will appear: Choose “Hitachi DVDCAM”.
A list of devices that are built into or
connected to PC will appear: Choose “Hitachi
DVDCAM”, and then click “Import”.
Click
Click
Click