Hitachi DZ-B35A - Manual (Page 144)

English
144
Transfer of images
stops. Connect the DVD video camera/recorder to another USB terminal
of PC. If your PC is a desktop type, it is recommended that you
use USB terminal on the back of PC. If you are using USB2.0
extended card, it is also recommended that you install the newest
version driver provided by each USB2.0 card maker.
—
Is disc scratched or does dirt or fingerprint adhere to it?
Clean the disc.
DVD drive built into PC
cannot be used after the
provided software has
been installed. This problem may be solved if you update the DVD editing/
creating software of your PC.
—
Error appears when
starting DVD-
ImageMixer 3. Make sure that your PC display adapter (video card) conforms to
DirectX9.0c.
113
Movies are not
recognized by
application in PC. Make sure the power switch of this DVD video camera/recorder is
set to “
O ” or “ N ”. 31
The DISC EJECT
button is not valid when
the DVD video camera/
recorder is connected to
PC. While the DVD video camera/recorder is connected to PC, use
Explorer to right-click the DVD video camera/recorder drive icon
and execute “Eject”.
—
No sound is heard when
an MPEG file imported
into Macintosh is played
back on Quick Time
with an MPEG 2
playback component
adopted. Since an MPEG file imported into Macintosh using Pixe VRF
Browser EX uses the audio format of AC3 audio, no audio will be
played back even if the Quick Time MPEG-2 playback component
is introduced: Only video will be played back. Use ImageMixer
VCD/DVD2 for playback.
—
When the time stamp of
file in DVD-RAM is
viewed on PC, it is
different from the actual
recording time. The file system of this DVD video camera/recorder is operated on
Greenwich Mean Time (GMT), and time lag information has not
been set. With Windows
® as of January, 2006, the time stamp of
file viewed on Explorer looks different from the actual recording
time. The actual recording time will appear for date/time
indication on playback screen.
—
It will take some time to
save a video edited on
the video editor of
Image Mixer 3. If you are editing a video file whose contents are different from
those of project setting, it may take some time, since the entire
video file must be re-encoded. Reconfirm the project setting.
—
“Hardware Removal”
results in error. Exit Windows ® once, and then disconnect the DVD video
camera/recorder. If your PC uses Windows ® 2000 Professional,
the problem may be solved if you install Windows ® 2000 SP3 or
later.
—
No USB HS (high
speed) connection even
when USB2.0 card is
used. Make sure that you have already installed the driver provided with
the USB2.0 card.
You will need to install the driver provided by USB2.0 card maker
in order to operate the USB2.0 card at HS (high speed).
—
Symptom Cause and Correction
Reference
page