Humminbird 998c SI - Manual (Page 143)

133
Screen Snapshot
(optional-purchase MMC/SD Cards only)
Settings: Off, On; Default = Off
Screen Snapshot activates the screen snapshot function. When Screen
Snapshot is enabled, pressing the MARK key creates a saved screen
snapshot on the optional-purchase MMC/SD card installed in your unit’s
card slot. All active menus, dialog boxes, warnings and messages are
captured and saved automatically.
NOTE: You must have an optional-purchase MMC/SD card installed for the
Screen Snapshot feature to work.
NOTE: If you use your MMC/SD card in two different Fishfinder units that have
different screen sizes, the recordings made on one unit will still be present on the
card, but will be represented by the Unavailable icon (circle with a slanted line
through it) on the Snapshot and Recording View on the other unit.
AIS
(optional-purchase AIS equipment only)
Settings: Press the RIGHT Cursor key to activate.
Your Fishing system is compatible with AIS technology. This equipment must
be purchased separately and connected properly to the control head for AIS
to be activated in your Fishing System.
When an AIS is connected to the Fishing System, AIS will appear as a
menu option in the Accessories Menu Tab. AIS allows you to locate and
monitor other vessels, or Targets, within range of the VHF signal. The AIS
then exchanges information with those targets, including vessel
identification, position, course, and speed.
Cargo Boat
Dredge Boat
Law Boat
Passenger Boat
Vessel Icons
Unidentified Boat
Sail Boat
Tow Boat
Tug Boat
NOTE: For more information, see Snapshot and Recording View and
Snapshot and Recording X-Press™ Menu.
Accessories Menu Tab