Maintenance, Cooling system – Husqvarna Chainsaw T435 User Manual
Page 37

MAINTENANCE
English
–
37
Cooling system
To keep the working temperature as low as possible the
machine is equipped with a cooling system.
The cooling system consists of:
1
Air intake on the starter.
2
Air guide plate.
3
Fins on the flywheel.
4
Cooling fins on the cylinder.
5
Clutch cover
Clean the cooling system with a brush once a week, more
often in demanding conditions. A dirty or blocked cooling
system results in the machine overheating which causes
damage to the piston and cylinder.
!
WARNING! The engine must be stopped
when making adjustments.
See also other documents in the category Husqvarna Petrol tool:
- 455 Rancher (44 pages)
- 372XPW (44 pages)
- 327P4 (36 pages)
- 436 LI (44 pages)
- 115 13 81-26 (44 pages)
- 318 (24 pages)
- 320 (25 pages)
- 385XP (40 pages)
- 390XP (44 pages)
- OPERATORS MANUAL CS 2159W (44 pages)
- 362XP (44 pages)
- 371XP (36 pages)
- 365 (40 pages)
- 372XP (40 pages)
- 1151375-95 (44 pages)
- 1153179-95 (44 pages)
- 1151436-95 (44 pages)
- 232R (36 pages)
- 232RD EN (30 pages)
- 232R (44 pages)
- 232RD (44 pages)
- 235R (52 pages)
- 23 COMPACT (15 pages)
- 50 Special (42 pages)
- 135E (420 pages)
- 576 XP EPA III (44 pages)
- 246 (36 pages)
- 236E (23 pages)
- 1151002-95 (45 pages)
- 576XP AutoTune (44 pages)
- 1151338-95 (44 pages)
- 1153183-26 (44 pages)
- 575XP (48 pages)
- 570 (44 pages)
- 353 E-tech (44 pages)
- EPA III (132 pages)
- 394XP (36 pages)
- TrioBrake 345e EPA II (44 pages)
- 340E EPA II (48 pages)
- 261 (36 pages)
- TAC 345e (44 pages)
- 1153136-95 (36 pages)
- 450e (44 pages)
- 445 (44 pages)
- 346XP/ 351 (44 pages)