Plotter has no power, Plotter display is functioning but motor, Can't make changes to control panel settings – HP V8.5 User Manual

Page 68

T R O U B L E S H O O T I N G

7-8

V8.5e Rev 2.2.2002

3. If the lid does not close securely, or if the head pressure is too
low, contact your authorized service center.

Plotter has no power

Possible Cause:

If the plotter is plugged in to a functioning
outlet, then the AC fuse has blown.

Solution:
1. Replace the fuse as described in Chapter 6.

Plotter display is functioning but motor does not function

Possible Cause:

Either the 5 V or 24 V power supply is
malfunctioning.

Solution:
1. Contact your authorized service center.

Can’t make changes to control panel settings

Possible Cause:

Plotter is in ONLINE mode.

Solution:
1. Press the ON/OFFLINE button.