Hoover Deep Cleaner - Manual (Page 8)

8
When finished using the hose and tool, remove water
from the hose.
✓ Turn deep cleaner on and hold end of hose up for
several seconds (A). Do not press trigger. (Fig. 20)
✓ Turn deep cleaner off and unplug it.
✓ Hold hose connector in sink and press trigger to
remove solution from hose (B) (Fig. 20).
Unplug deep cleaner from electrical outlet.
➤ Hook hose connector (C) into caddy (Fig. 21).
➤ Wrap hose around caddy in a counterclockwise
direction (Fig. 22).
➤ Hook tool connector (D) and ‘SpinScrub’ tool (E) onto
caddy (Fig. 23).
➤ Snap upholstery tool (F) into caddy (Fig. 24).
The handle must be in the upright position in order to
get cleaning solution through the hose.
Drain the hose
Store hose
B
A
F
E
D
C
20
22
21
24
23