Honeywell HXMT9 / HXMT9X - Manual (Page 50)

Motion Detection Sensor Setup
< Figure 29 > Motion Detection Sensor Setup screen.
Each camera can be set up with two sets of motion detection
parameters. The parameter sets are defined as Mode 1 and Mode 2.
(You can schedule when the modes will be used in the Motion Detection
Schedule Setup screen.)
Turns motion detection On or Off.
When using Update, the multiplexer compares the
current field with the previous one. When using Master, the
multiplexer compares a master image to continuous video.
When set to Normal, the multiplexer detects all
motion. When set to Vector, the multiplexer detects motion based on
user definitions.
Sets how much luminance change there must be in the
target area before the multiplexer reads the change as motion. 01 is
the lowest sensitivity and 16 is the highest.
• On/Off :
• Update/Master :
• Normal/Vector :
• Sensitivity :
36