Video loss action setup – Honeywell HXMT9 / HXMT9X User Manual

Page 39

This screen allows you to associate various relays and links to the

cameras in motion alarm conditions.

There are four possible relay settings. 1 or 2: Sets either

internal relay 1 or 2 to be activated by a motion alarm. 1&2: Sets both

internal relays 1 and 2 to be activated by a motion alarm. Off: Neither

internal relay will be activated by a motion alarm.

This button links the motion detection to an alarm action.

It can be set to Off or any one of the 9 alarm actions. All alarm

actions take priority over motion actions.

This takes you to the Motion Alarm Action Setup (1)

submenu.

Saves your changes and returns to the Main Menu.

• Relay :

• Alarm Link :

• < Back :

• Exit :

Video Loss Action Setup

< Figure 20 > Video Loss Action Setup screen.

This screen allows you to set up the actions the multiplexer will take

when there is a video loss condition.

ENGLISH