Honeywell HXMT9 / HXMT9X - Manual (Page 38)

• Recording :
• Spot Monitor 1 to 4 :
• Next > :
• Exit :
This allows you to select how video will record during a
motion alarm condition. INT interleaves images from the camera with
an alarm every other field giving you more images from that camera.
When there are multiple alarms, the cameras with alarms are
interleaved. ONLY records images from only the camera with an
alarm condition. UNC leaves the recording parameters unchanged.
When set to On, that Spot Monitor will display
the camera with a motion alarm condition. When there are multiple
alarms, cameras with alarms will display sequentially. When set to Off,
that Spot Monitor’s display does not change during motion alarm
conditions.
This takes you to the Motion Alarm Action Setup (2)
submenu.
Saves your changes and returns to the Main Menu.
Motion Action Setup (2)
< Figure 19 > Motion Action Setup (2) screen.
24