Humminbird NS 10 - Manual (Page 32)

Use the up/down arrows to select the individual letters of the waypoint name. All eighr spaces do
not have to be used.
Press ENTER after each correct letter.
Press SELECT after the name is correct to exit the WATPOINT menu, pressing SELECT again
will exit to the MAIN MENU and pressing SELECT a third time will exit the SELECT System and
return to the map. Or you may press MAP, at any time while in the Select System, to return
directly to the map display.
Existing Waypoints
-
Changing Permanent Waypoints
- Changing a Temporary Waypoint to a Permanent Waypoint
- Deleting a Waypoint
After entering a permanent waypoint you may want to change or delete it. Any temporary
waypoint that you have defined by using the P STOR key may be converted to a permanent
waypoint. All changes and deletions are made by using the Select System.
To retrieve the MAIN MENU press SELECT.
Use the up/down arrows to highlight WAYPOINT.
Press ENTER when the selection is correct. The WAYPOINT menu will be displayed.
Use the up/down arrows to highlight CHANGE/DELETE.
Press ENTER when the setting is correct. The SELECT WAYPOINT screen will be displayed.