Copying tapes from a camcorder, Hook-up – Hitachi VT-FX630A User Manual
Page 42
42
• Make sure that "STEREO" audio is selected from the VCR Set-Up Menu, as shown on page 35, of
"RECORDING OPERATIONS" section, "Stereo vs. mono sound".
• Select VCR recording speed (SP or EP) as shown on page 32, of "RECORDING OPERATIONS" section,
"Basic recording steps".
1 Press the AVX button on remote control, so that LINE appears on the display.
............................................................................................................................................................
2 Turn on the stereo, amd start the selection you wish to record.
............................................................................................................................................................
3 Press the REC button on VCR or REC button on the remote control to start recording.
............................................................................................................................................................
4 Press the STOP button to stop recording.
COPYING TAPES FROM A CAMCORDER
•
Hook-up
You may use your VCR to copy tapes from any camcorder onto standard VHS cassette
tapes.
Note: If your camcorder is not stereo (has only one audio plug), connect it into the AUDIO IN-L input on
the back of the VCR.
* It is not necassary to connect the S-VIDEO jack
Camcorder Hook-up Illustration.