Hoover 53425 - Manual (Page 14)

Empty bag by placing large opening
over a paper. The bulk of the dirt will
fall on the paper. Shake bag until
clean.
Replace the bag closure clip and at-
tach bag to cleaner following the
instructions give on page 5.
The belt
The belt of your HOOVER commercial cleaner controls the speed of the agita-
tor and it is important for the effective operation of the cleaner. The belt is
located under the bottom plate of the cleaner and should be checked from
time to time to be sure it is in good condition.
When to replace the belt
To check the belt, remove the bottom plate (see following section). If the belt
is stretched or cut; or if the agitator fails to rotate, replace the belt.
What belt to buy
To assure effective operation, use only genuine HOOVER belts with your
HOOVER commercial cleaner. When purchasing a new belt ask for Hoover
part No. 49258.
How to replace the belt Disconnect cleaner from electrical outlet.
Turn cleaner over. Remove metal
plate on bottom of cleaner by push-
ing latches toward outside of cleaner.
I
13