Husqvarna 11 C - Manual (Page 47)

English –
45
Dimensions Rider 13 C Rider 15 C
Length without unit 2010 mm / 6.58 ft 2010 mm / 6.58 ft
Length with unit 2220 mm / 7.29 ft 2220 mm / 7.29 ft
Width without unit 880 mm / 2.89 ft 880 mm / 2.89 ft
Width with unit 1114 mm / 3.65 ft 1114 mm / 3.65 ft
Height 1070 mm / 3.52 ft 1070 mm / 3.52 ft
Weight in working order
with unit
240 kg / 529 lb 249kg / 549 lb
Wheel base 855 mm / 2.8 ft 855 mm / 2.8 ft
Track front 715 mm / 2.34 ft 715 mm / 2.34 ft
Track rear 625 mm / 2.05 ft 625 mm / 2.05 ft
Tyre size 165/60 - 8 165/60 - 8
Tyre pressure, front & rear 60 kPa (0,6 kp/cm 2 / 8.5 PSI) 60 kPa (0,6 kp/cm 2 / 8.5 PSI)
Max. gradient 15° 15°
Engine
Manufacture Briggs & Stratton / 219907011E1 Briggs & Stratton / 282H070110 E1
Power 9,2/12,5 kW/h.p. 11,4 / 15,5 kW/h.p.
Displacement 465 cm 3 465 cm 3
Fuel minimum 85 octane unleaded minimum 85 octane unleaded
Tank volume 7 litres / 7.4 USqt 7 litres / 7.4 USqt
Oil SAE 5W/30 orSAE 10W/30 SAE 5W/30 or SAE 10W/30
class SJ-CF class SJ-CF
Oil volume 1,4 litres 1.5 USqt 1,4 litres / 1.5 USqt
Start Electric starter Electric starter
Noise emissions and cutting width
Measured noise level 100 dB(A) 97 dB(A)
Guaranteed noise level 100 dB(A) 100 dB(A)
Cutting width 940 mm / 3,08 ft 940 mm / 3,08 ft
Electrical system
Type 12 V, negative earth 12 V, negative earth
Battery 12 V, 24 Ah 12 V, 24 Ah
Spark plug Champion QC12YC Champion QC12YC
electrode gap = 0,75 mm / 0.030" electrode gap = 0,75 mm / 0.030"
Main fuse 15 A Flat-blade mounting 15 A Flat-blade mounting
Transmission
Manufacture Tuff Torq K46 Tuff Torq K46
Oil SAE 10W/30, class SF–CC SAE 10W/30, class SF–CC
No. of forward gears - -
No. of reverse gears - -
Speed in forward gears 0-9 km/h 0-9 km/h
Speed in reverse 0-6 km/h 0-6 km/h
Cutting unit
Type 3-blade unit Combi 940 mm 3-blade unit Combi 940 mm
Cutting height 9 pos. 40–90 mm / 1 3/4"-3 3/4" 9 pos. 40–90 mm / 1 3/4"-3 3/4"
Blade diameter 360 mm / 14 3/16" 360 mm / 14 3/16 "
TECHNICAL DATA
When this product is worn out or no longer used it should be returned to
the dealer or other appropriate body for recycling.