Hoover S3083-030 - Manual (Page 13)

To provide space for grasping the agitator,
remove end of hose from holder, Fig. 3.
Then grip agitator and pull out. Fig. 4.
Remove old belt.
Place one end of the new belt around
agitator pulley with smooth side of belt
against the pulley. Fig. 5.
5
Line up metal projection on end of agitator
(opposite the belt) with groove on inside
wall of nozzle. Fig. 6. Then slide agitator
into place.
6
Replace end of hose in holder. Fig. 7.
12