haier L15C10A - Manual (Page 19)

Menu Operations
Function Menu Options Continued
Press P+/- button to select desired option. Press V+/- button to set up the
mode .
In lock on mode, when screen is blank, will be always
displayed on the screen. ,
enter SOURCE LOCK submenu and set the mode off, or activate CLEAR LOCK .
MAX VOLUME:Press P+/- button to select it. Press V+/- button for adjustment
between 0
100. If a certain value is set, when volume is being adjusted,
the sound value can not exceed that maximum volume value.
VOL SET: Press V+/- to select ON or OFF.
INITIAL VOLUME(only works when VOL SET is set ON): Used to memory the volume
you have set when you turn on your TV after turn off it. (Eg., When INITIAL VOLUME
is set to 50, you can still adjust the volume above or below 50 by V+/- . If the TV is
turned on the second time, the volume will resume 50)
CLEAR LOCK: Press P+/- button to select it. Press V+/- button to unlock all set
modes, setting all lock options to off, and the maximum volume returns to
.
If some source is set on,
SOURCE LOCK
100
The screen will display blue background with the
mute mode and Lock icon when you enter the source.
If you want to cancel the lock of some source mode
Adjust Menu Options
1. Press MENU and V+/V- button until the following menu appears on the
screen
ADJUST
AUTO SYNC.
PHASE
CLOCK
H. POSITION
V. POSITION
Note: This menu is only appears in PC mode .
2. Press P+/P- button to enter the adjust menu and to go up and down to
select the desired option
3.Press V+/V- button to increase and decrease the level to adjust the
selected option to your preference .
4. Repeat step 2 and step 3 until desired quality has been achieved.
Functions:
: Is opted for adjustment of picture location frequency and phase
parameters .
AUTO SYNC
50
50
50
50