haier L15C10A - Manual (Page 17)

Menu Operations
Function Menu Options
1. Press MENU button and V+/V- until the following menu appears
on the screen.
2. Press P+/P- button to enter the sound menu and to go up and down to
select the desired option .
3.Press V+/V- button to increase and decrease the level to adjust the
selected option to your preference .
4. Repeat step 2 and step 3 until desired picture quality has been achieved .
Functions:
1. : Display current mode . There are
to display
2. LANGUAGE: Used to select the OSD language.
3. : To switch the teletext languages.
4. To select or .
5. : To select the display mode between and
6. :
7. : Press V+ to reset some settings to the factory default .
8. HOTEL LOCK: Press V+ to enter it and the following appears on the screen:
INPUT SOURCE
TXT LANGUAGE
TXT EAST/WEST: EAST WEST
DISPLAY MODE 4:3 FULL SCREEN
BLUE SCREEN
RESET
PC , COMPONENT ,
HDMI, DVD , TV, SCART, SVIDEO
To set , the screen will be in blue screen after 3 seconds
if there is no signal.
On
INPUT SOURCE TV
LANGUAGE ENGLISH
TXT LANGUAGE PAN EUROPEAN
TXT EAST/WEST EAST
BLUE SCREEN ON
DISPLAY MODE 4:3
RESET
HOTEL LOCK
FUNCTION
Only available for special series
PASSWORD:
- - - -
If password is correctly entered, the Lock set menu will be entered. If the
password is not correctly entered, you will be required to reenter the password
and the cursor will stay at the first place. Lock set menu is as follows:
(The initial password is 0000. If CLEAR LOCK is activated, the password
) comes back to initialization and each lock is canceled